Heavy-Duty Workshop Tiles — Black (15 mm & 20 mm) — 1000mm×1000 mm

In stock. Extra-thick loose-lay workshop tiles with square (non-interlocking) edges. Choose 15 mm or 20 mm for the toughest bays, forklift lanes, and impact zones.
Each tile = 1 m². Lay fast. Use immediately.

Specifications

• Dimensions: 1000mmx1000mm
• Thickness: 15mm and 20mm
• Eco-friendly: Yes
• Material: Recycled SBR/NR
• Weight: 16,9kgs/tile
• Hardness: 20mm – 65 HA.
• Stain resistant: Yes
• Reduces noise: Yes
• Anti-slip: Low mesh count texture for non-slip

Box includes: 1× heavy-duty tile (1 m²).
Tools: Broom/vac, tape measure, rubber mallet, straight edge, utility knife.

Key Features

• Ultra-thick build (15/20 mm) for maximum load, impact, and point-load resistance.

• Oil & chemical resistant surface for real workshop conditions.

• Non-slip, low-glare finish that hides scuffs and keeps bays looking professional.

• Large-format 1 m² tile = fewer seams and rapid coverage.

Benefits

• Protects the slab from chips, cracks, and staining.

• Minimal downtime — loose-lay install and immediate use.

• Lower lifetime cost — replace only a tile if it’s damaged.

• Clean, uniform look that upgrades any service bay or industrial zone.

Best-fit Applications

• Mechanic/service bays (under lifts, jacks, stands)

• Forklift lanes & pallet zones

• Industrial work cells and impact areas

• Heavy storage beneath racking and parts bins

Coverage guide

Area (m) × Area (m) = m² → Tiles needed = m² (add 5–10% for cuts/spares).
Example: 36.2 m² → order 38 tiles.

Installation (non-interlocking)

• Prep: Sweep/vac and ensure the subfloor is dry, clean, and level.

• Plan: Snap chalk lines; start from the center or a straight edge.

• Lay: Loose-lay tiles tight to each other; trim at walls/columns.

• Stabilise (recommended): Use perimeter double-sided tape or PU adhesive at entrances, turning circles, and ramps. Fit bevelled edges at doorways.

FAQs

•  Do these tiles interlock?
  No. They are square-edge, non-interlocking tiles designed for fast loose-lay installs.
•  Will they move without adhesive?
  In straight-through traffic they sit stable. For forklift turning areas, door thresholds, or slopes, use perimeter tape or PU adhesive to lock them down.
• Which thickness should I choose?
  15 mm suits most bays. Choose 20 mm for extreme point loads, frequent forklift turning, or high-impact zones.