GripLock Stud Tile – Durable Rubber Flooring for High-Use Areas

The GripLock Stud Tile – 500 × 500 × 5mm is a durable rubber floor tile designed for work areas, maintenance spaces, stockrooms and high-use floors that need practical surface protection. Its studded surface creates a distinctive textured finish while supporting grip under normal foot traffic.

Made from rubber, the tile combines flexibility with a strong modular floor design. The connecting edges allow multiple tiles to be joined together to create a larger floor surface without requiring a permanently bonded flooring system in many standard applications.

For customers comparing complete modular rubber floor systems, browse our Interlocking Rubber Floor Tiles range for different surface textures, tile designs and flooring options.

Each four-tile layout covers approximately 1m². The 500 × 500mm format also makes floor planning, installation and individual tile replacement easier.

GripLock Stud Tile Product Specifications

Why Choose the GripLock Stud Tile?

The GripLock Stud Tile is designed for customers looking for a practical rubber flooring solution with a textured stud surface. Its modular construction allows a floor area to be installed in sections and expanded when additional coverage is required.

Key benefits include:

• Durable rubber construction for regular use.
• Studded surface provides a textured finish.
• 500 × 500mm tile size simplifies floor planning.
• 5mm profile suitable for many general floor applications.
• Four tiles cover approximately 1m².
• Modular edges connect neighbouring tiles.
• No glue normally required in suitable areas.
• Individual sections can be replaced when necessary.
• Helps protect suitable concrete floor surfaces.
• Easier to maintain than unfinished concrete.
• Suitable for phased flooring projects.
• Allows floor layouts to be expanded later.
• Practical for work and utility areas.
• Simple routine cleaning and maintenance.
• Creates a more organised finished floor surface.

Studded Rubber Tile for Practical Work Areas

The studded surface is one of the main features of the GripLock Stud Tile. Rather than using a flat or leather-textured finish, the tile has a raised surface pattern that gives the floor a distinctive industrial appearance.

This makes the product suitable for practical spaces where customers want a rubber floor with visible surface texture.

Typical applications include:

• Maintenance rooms.
• Tool areas.
• Stockrooms.
• Utility spaces.
• General work areas.
• Commercial back rooms.
• Staff service areas.
• Light production spaces.
• Multipurpose rooms.
• Covered indoor work zones.

Rubber Construction for Flexible Floor Coverage

The GripLock Stud Tile is manufactured from rubber rather than PVC.

Rubber provides a practical surface for areas that require a resilient modular flooring option. The material helps create a more forgiving floor surface compared with exposed concrete while providing a durable layer between daily activity and the original floor.

The 5mm thickness keeps the tile relatively low profile while maintaining the practical advantages of a rubber floor tile.

For broader rubber floor protection products, customers can also explore our Rubber Mats collection for mats, rolls and alternative rubber surface solutions.

500 × 500 × 5mm Modular Tile Format

Each GripLock Stud Tile measures 500 × 500mm and is 5mm thick.

The standard tile dimensions make calculating floor coverage straightforward. Four tiles arranged together cover approximately one square metre.

For example:

We recommend confirming the final floor measurements and allowing for cutting or project-specific wastage before ordering.

Modular Rubber Flooring for High-Use Spaces

The GripLock Stud Tile can be used to create a modular rubber floor across suitable high-use areas.

Unlike a permanently poured or bonded floor finish, individual tiles form the surface section by section. This can make future floor changes and localised replacement easier.

The modular format is useful because it can:

• Reduce complicated floor installation.
• Allow sections to be installed progressively.
• Make individual tile replacement easier.
• Support future floor expansion.
• Cover suitable worn concrete surfaces.
• Create a consistent floor finish.
• Help organise defined work areas.
• Reduce disruption during certain floor upgrades.

GripLock Stud Tile for Maintenance Areas

Maintenance areas often experience regular staff movement, tools and routine operational activity. A bare concrete floor can become marked and difficult to keep visually consistent over time.

The GripLock Stud Tile creates a separate rubber surface over a suitable existing floor.

Its modular format is especially useful where the floor layout may change as benches, tools or workstations are repositioned.

GripLock Stud Tile for Stockrooms and Utility Areas

Stockrooms and utility spaces need flooring that is practical to clean and simple to maintain.

The 500 × 500mm tile format allows floor coverage to be planned around shelving, storage areas and general movement routes. If one tile becomes damaged, the affected section may be replaced without necessarily removing the entire floor.

This makes GripLock Stud Tile suitable for selected:

• Stockrooms.
• Storage spaces.
• Utility rooms.
• Service areas.
• Equipment rooms.
• Commercial back areas.

How to Install GripLock Stud Tiles

Before installation, inspect the existing floor. The surface should be firm, clean, dry and reasonably level.

Remove loose dust, grit and debris before laying the tiles. Oil or other contamination should be cleaned from the floor where appropriate.

Installation steps

1. Clean the existing floor thoroughly.
2. Allow the surface to dry.
3. Measure the total installation area.
4. Plan the tile direction and starting point.
5. Begin from a straight reference line.
6. Position the first GripLock Stud Tile.
7. Connect the next tile along the locking edges.
8. Continue laying tiles in aligned rows.
9. Check the floor regularly during installation.
10. Trim perimeter tiles where required.
11. Install suitable edging at exposed sides.
12. Inspect the completed floor for movement or raised sections.

Adhesive requirements depend on the application, floor conditions and expected operational use.

Cleaning and Maintaining GripLock Stud Tiles

Routine maintenance helps keep the rubber surface clean and in good condition.

Loose dust and debris can normally be removed with a broom or suitable vacuum cleaner. For general floor cleaning, use water and a mild cleaning product suitable for rubber surfaces.

Maintenance tips

• Sweep loose dirt regularly.
• Vacuum textured areas where necessary.
• Wipe spills promptly.
• Mop using a suitable mild cleaner.
• Avoid aggressive petroleum-based solvents.
• Do not drag sharp metal edges across the floor.
• Inspect connecting sections periodically.
• Reposition loose tiles where required.
• Replace damaged sections individually.
• Clean around floor edging during routine maintenance.

Always test unfamiliar cleaning chemicals on a small, less visible section before widespread use.

GripLock Stud Tile vs Smooth Rubber Flooring

The main difference is the surface design.

The best choice depends on the required surface finish, application and floor environment.

Where Should GripLock Stud Tile Not Be Used?

Although GripLock Stud Tile is a durable rubber flooring product, one product is not suitable for every industrial environment.

A specialist flooring assessment may be required for:

• Continuous forklift traffic.
• Extremely heavy machinery.
• Aggressive chemical exposure.
• High-temperature processes.
• Permanently submerged areas.
• Uneven or unstable subfloors.
• Specialist electrical environments.

Choosing flooring according to the actual operating conditions can improve performance and reduce unnecessary floor replacement.

Order GripLock Stud Tile – 500 × 500 × 5mm in South Africa

Choose the GripLock Stud Tile – 500 × 500 × 5mm for a durable rubber tile with a practical studded surface and modular floor design.

Suitable for selected work areas, maintenance rooms, stockrooms, utility spaces and high-use floor sections, the GripLock Stud Tile provides a practical alternative to leaving suitable concrete surfaces exposed.

PVC Floor Tile offers product support, bulk order assistance and delivery across South Africa.

Order GripLock Stud Tiles today or contact our team for help calculating the number of tiles required for your floor area.

FAQs

What is the GripLock Stud Tile made from?

The GripLock Stud Tile is made from rubber.

What size is the GripLock Stud Tile?

Each tile measures 500 × 500mm and has a thickness of 5mm.

How many GripLock Stud Tiles cover 1m²?

Approximately four tiles cover 1m².