DiamondGrip Interlock Tile 500 × 500 × 5mm for Garages, Workshops and Commercial Floors

The DiamondGrip Interlock Tile 500 × 500 × 5mm is a durable modular flooring option designed for garages, workshops, factories, storage areas and busy commercial interiors. Its distinctive diamond-tread surface creates a practical industrial appearance while helping provide underfoot traction during normal use.

Manufactured from flexible PVC, the tile combines a hard-wearing surface with a convenient interlocking edge system. Each tile connects directly to the next, allowing suitable floors to be upgraded without grout or complicated wet installation processes.

The modular design also makes future maintenance more manageable. Individual tiles can be lifted and replaced if one section becomes damaged, reducing the need to remove the entire floor.

Customers comparing more modular flooring options can our shop   for additional colours, surface patterns and product styles.

DiamondGrip Interlock Tile Product Specifications

Specification	Product detail
Product name	DiamondGrip Interlock Tile 500 × 500 × 5mm
Material	Recycled flexible PVC
Tile dimensions	500 × 500mm
Thickness	5mm
Coverage	Four tiles cover approximately 1m²
Surface pattern	Raised diamond-tread finish
Connection system	Visible interlocking edges
Installation	Snap-together modular installation
Recommended use	Indoor and selected covered areas
Suitable applications	Garages, workshops, storage rooms and commercial interiors
Maintenance	Sweep, vacuum or damp mop
Colour options	Subject to current production and stock availability
Adhesive requirement	Not normally required for many standard indoor installations

Technical performance can vary according to the subfloor, traffic type, equipment weight, temperature, cleaning method and installation conditions. Specialised industrial applications should be assessed before ordering.

What Is a DiamondGrip Interlock Tile?

The DiamondGrip Interlock Tile is a 500 × 500 × 5mm modular PVC floor tile featuring a raised diamond-pattern surface. The diamond design gives the product a strong industrial appearance and helps create texture across the walking surface.

The tile is designed to connect with compatible tiles around its perimeter. Once joined, the individual pieces form a larger modular floor that can cover many clean, dry, firm and reasonably level existing surfaces.

Unlike ceramic flooring, this system does not require grout between every tile. It also avoids the need to install a large continuous floor covering across the entire room at once.

The floor can be completed in sections, expanded later or repaired by replacing selected tiles.

Main Features of DiamondGrip PVC Flooring

Distinctive diamond-tread surface

The raised diamond pattern is the defining feature of this product. It provides a robust, industrial-style appearance that works well in garages, workshops and operational areas.

The textured surface can also help improve underfoot traction compared with completely smooth flooring. However, spills, oil, loose dirt and grease should always be cleaned promptly because contaminants can make any floor slippery.

Flexible PVC construction

The DiamondGrip tile is manufactured from flexible PVC. This material provides a practical balance between strength and flexibility, allowing the tile to withstand routine activity without being as brittle as some hard flooring materials.

The PVC structure may also provide a slightly more forgiving surface than untreated concrete or ceramic tiles.

Modular 500 × 500mm format

Each tile measures 500 × 500mm. Four tiles cover approximately one square metre, making the product relatively straightforward to measure and calculate.

The modular size makes the tiles easier to:

• Carry into the installation area.
• Position individually.
• Trim around perimeter walls.
• Fit around fixed structures.
• Replace when damaged.
• Extend when more floor coverage is required.

Interlocking edge system

The interlocking edges connect adjoining tiles without grout. In many suitable indoor spaces, the floor can be installed as a loose-lay modular system.

Additional fixing may still be necessary in sloped areas, entrances, isolated sections or locations exposed to frequent vehicle turning and lateral movement.

Replaceable individual sections

A damaged tile can often be disconnected and replaced without rebuilding the entire floor. This is especially useful in workshops, garages and commercial areas where one section may experience more wear than the rest.

Key Benefits of DiamondGrip Interlock Tiles

The DiamondGrip Interlock Tile is designed for customers who need practical flooring that can be installed, maintained and adapted with limited disruption.

Key benefits include:

• Creates a durable modular floor surface.
• Provides a distinctive diamond-pattern finish.
• Helps improve the appearance of worn concrete floors.
• Installs without grout.
• May be installed without adhesive in many suitable areas.
• Allows individual tiles to be replaced.
• Helps protect the existing subfloor from routine wear.
• Works well in garages and workshops.
• Can be used to create selected work or storage zones.
• Provides a textured walking surface.
• Supports phased installation.
• Can be expanded when additional coverage is required.
• Requires straightforward routine cleaning.
• Creates a cleaner and more organised working environment.
• Reduces the need for complete permanent floor replacement.

Suitable Applications

Garages

The DiamondGrip Interlock Tile is suitable for many residential and light commercial garage floors. It can help cover worn but stable concrete and create a cleaner surface beneath parked vehicles, storage cabinets, workbenches and tools.

The diamond-tread pattern complements garage interiors and gives the floor a practical workshop-style appearance.

Before installing the tiles in a vehicle area, consider:

• Vehicle weight.
• Tyre width.
• Steering movement.
• Frequency of vehicle entry.
• Floor temperature.
• Oil or fluid exposure.
• Condition of the underlying concrete.

Turning a steering wheel while a vehicle is stationary may place additional sideways pressure on modular tile connections.

Workshops

Workshop floors need to be practical and maintainable. The DiamondGrip tile can be installed in general work areas, around benches, beneath storage systems and in selected service zones.

The PVC surface can help protect the underlying floor from routine dirt, tools and everyday workshop activity.

For workshops with very heavy machinery, intense vibration, hot metal, welding activity or specialised chemicals, confirm whether the product is suitable before installation.

Factory areas

The tile may be considered for selected factory areas such as:

• Assembly stations.
• Packing areas.
• Staff walkways.
• Inspection points.
• Tool storage areas.
• Light production sections.

Machinery loads, point pressure and repeated trolley movement should be assessed separately. A 5mm modular tile may not be suitable for every heavy industrial application.

Storage rooms

The modular PVC tile can help improve general storage areas, equipment rooms and stock sections. It creates a cleaner surface and allows damaged areas to be repaired individually.

Heavy shelving should be installed carefully. Concentrated point loading may require load-spreading plates or additional assessment.

Commercial interiors

The DiamondGrip Interlock Tile may be used in selected commercial spaces that require a strong industrial-style surface, including:

• Auto-related showrooms.
• Technical service counters.
• Equipment display areas.
• Utility rooms.
• Back-of-house retail areas.
• Maintenance spaces.
• Commercial storage sections.

Exhibition and display zones

The modular design may also be useful for temporary displays, product launches and exhibitions. Tiles can be installed for an event and removed afterwards, provided they are handled and stored correctly.

Why Choose a Diamond-Tread Surface?

Diamond-tread patterns are commonly associated with industrial floors, vehicle areas and technical environments. The pattern gives the floor a stronger visual identity than a plain tile.

The raised design can help:

• Add texture to the walking surface.
• Complement industrial interiors.
• Create an organised workshop appearance.
• Define selected operational zones.
• Provide a suitable background for tools and equipment.
• Make a garage floor appear more complete.
• Add visual detail without using multiple colours.

The surface pattern is not a substitute for proper workplace safety procedures. Spills, grease and loose debris must still be removed promptly.

Preparing the Existing Floor

Good preparation is essential for a successful modular tile installation. The DiamondGrip tile will follow the shape of the floor beneath it, so severe imperfections may remain visible after installation.

The subfloor should be:

• Clean.
• Dry.
• Firm.
• Stable.
• Reasonably level.
• Free from loose concrete.
• Free from standing water.
• Free from sharp debris.
• Free from heavy oil contamination.

Inspect the floor

Check for:

• Major cracks.
• Crumbling concrete.
• Loose coatings.
• Holes.
• High points.
• Low sections.
• Moisture problems.
• Expansion joints.
• Damaged floor edges.

Small cosmetic imperfections may be covered, but serious structural or moisture problems should be repaired first.

Clean the surface

Sweep and vacuum the floor thoroughly. Remove sand, stones, screws, metal fragments and other materials that may prevent the tiles from lying flat.

Oil and grease should be cleaned using a suitable degreasing method. Allow the area to dry before installing the floor.

DiamondGrip Interlock Tile Installation Guide

Step 1: Measure the area

Measure the length and width of the room.

Use this calculation:

Floor length × floor width = total square metres

Because four 500 × 500mm tiles cover approximately one square metre, multiply the total area by four to estimate the basic number of tiles required.

Add approximately 5% to 10% for cutting, unusual corners, obstacles and future replacement tiles.

Step 2: Plan the layout

Before connecting the full floor, place several tiles loosely in position.

Check:

• Surface direction.
• Alignment with the walls.
• Location of perimeter cuts.
• Doorway positions.
• Equipment placement.
• Colour layout.
• Expansion space.
• Entrance transitions.

Starting from the centre may help create balanced perimeter cuts in visible rooms. Starting from a straight wall may be simpler in garages, workshops and storage spaces.

Step 3: Establish a straight starting line

Do not automatically rely on a wall being completely straight. Use a chalk line, laser or measured reference line to guide the first row.

The accuracy of the first row affects the alignment of the entire installation.

Step 4: Connect the tiles

Place the first tile in position. Align the locking edge of the second tile and press the connectors together firmly.

Continue adding tiles one row at a time.

Check frequently that:

• The tiles remain straight.
• The diamond patterns face the correct direction.
• The connectors are fully engaged.
• No debris is trapped underneath.
• The surface lies flat.

Avoid forcing connectors that are not correctly aligned.

Step 5: Trim the perimeter

Measure the remaining space carefully before cutting each perimeter tile.

Mark the cutting line and use a suitable sharp cutting tool. Make several controlled passes instead of trying to cut through the tile in one movement.

Use appropriate protective equipment and keep hands away from the cutting path.

Step 6: Finish exposed edges

Compatible edging or transition pieces can be installed at entrances and exposed sides. This creates a cleaner finish and helps reduce the height difference between the tile and the surrounding floor.

Step 7: Inspect the installation

Walk across the completed floor and check for:

• Raised edges.
• Incomplete connections.
• Uneven sections.
• Movement near entrances.
• Poor perimeter cuts.
• Trapped debris.
• Insufficient expansion allowance.

Correct these issues before returning the area to normal use.

Does DiamondGrip Flooring Need Adhesive?

Adhesive is not normally necessary for many standard indoor installations where the tiles cover a sufficiently large area and are restrained around the perimeter.

Additional fixing may be considered when:

• The floor is sloped.
• The installation covers only a small isolated section.
• Vehicles turn frequently on the surface.
• Heavy equipment creates sideways pressure.
• Temperature changes are significant.
• The area receives intense trolley movement.
• An entrance experiences repeated movement.
• The perimeter does not provide enough restraint.

Use only an adhesive suitable for PVC and the specific subfloor. Follow the adhesive manufacturer’s preparation and curing instructions.

Cleaning and Maintenance

Regular cleaning helps maintain the appearance and underfoot traction of the DiamondGrip surface.

Routine cleaning

• Sweep the floor regularly.
• Vacuum dust from the textured surface.
• Wipe spills promptly.
• Remove stones and sharp debris.
• Inspect tile joins in high-traffic areas.
• Keep entrances free from accumulated dirt.

Damp cleaning

Use clean water and a mild detergent suitable for PVC flooring. Apply it with a mop or appropriate floor-cleaning equipment.

The raised pattern may require extra attention because dirt can collect around the textured sections.

Remove dirty water rather than allowing it to dry on the floor. Rinse the surface if the cleaning product leaves residue.

Cleaning products to avoid

Avoid using:

• Harsh solvents.
• Strong acidic cleaners.
• Abrasive powders.
• Wire brushes.
• Undiluted bleach.
• Oil-based cleaning products.
• Unapproved industrial chemicals.
• Products that leave a slippery film.

Test unfamiliar cleaning products on a small hidden area first.

Oil, Water and Chemical Spills

The PVC tile can resist routine exposure to moisture and many common working-area substances. However, spills should not be left on the floor.

Oil, grease, water and chemicals may:

• Reduce underfoot traction.
• Travel between tile joins.
• Reach the underlying concrete.
• Discolour the surface.
• Affect the connecting edges.
• Create a workplace hazard.

Chemical resistance depends on the specific substance, concentration, temperature and exposure duration. Confirm suitability before using the tile in environments involving aggressive chemicals.

The modular installation should not be described as a waterproof membrane because water may travel through the joins and around the perimeter.

Replacing a Damaged Tile

One of the main advantages of modular flooring is the ability to replace an individual section.

To replace a damaged DiamondGrip tile:

1. Identify the affected tile.
2. Remove movable equipment from the surrounding area.
3. Disconnect the nearest accessible row.
4. Lift out the damaged tile.
5. Clean the exposed subfloor.
6. Check that the replacement tile is compatible.
7. Position the new tile in the correct direction.
8. Reconnect the interlocking edges.
9. Confirm that the repaired area lies flat.

Keep several spare tiles from the original order where possible. Recycled PVC products may have minor colour differences between manufacturing batches.

Creating Floor Zones with Colour

Where multiple colours are available, DiamondGrip tiles may be combined to create practical zones.

Different colours may help identify:

• Pedestrian walkways.
• Vehicle parking areas.
• Tool stations.
• Storage sections.
• Work bays.
• Equipment zones.
• Safety boundaries.
• Customer-facing areas.

Colour zoning should support, not replace, required safety signage and workplace procedures.

Indoor and Covered-Area Use

The DiamondGrip Interlock Tile is mainly recommended for indoor and selected covered environments.

Covered-area suitability depends on:

• Exposure to direct sunlight.
• Temperature changes.
• Wind-driven rain.
• Standing water.
• Drainage.
• Subfloor moisture.
• Expansion and contraction.
• Frequency of cleaning.

The product should not automatically be treated as permanent outdoor paving. Fully exposed environments may require a specialist outdoor drainage tile.

Temporary and Permanent Applications

The modular system can support both temporary and longer-term installations.

Temporary use

The tiles may be installed for:

• Exhibitions.
• Trade displays.
• Product demonstrations.
• Temporary workshop zones.
• Equipment launches.
• Pop-up automotive displays.

After use, clean and dry the tiles before storing them flat.

Longer-term use

For permanent working areas, pay additional attention to:

• Subfloor preparation.
• Perimeter restraint.
• Expansion allowance.
• Vehicle movement.
• Equipment loading.
• Entrance finishing.
• Cleaning procedures.
• Availability of replacement tiles.

Important Factors Before Ordering

Consider the following before selecting the product:

• Size of the floor area.
• Existing floor condition.
• Type of daily traffic.
• Vehicle or equipment weight.
• Wheel size and material.
• Frequency of turning movement.
• Exposure to oils and chemicals.
• Cleaning methods.
• Moisture levels.
• Indoor temperature.
• Required slip performance.
• Fire and safety requirements.
• Colour preference.
• Need for edging or transitions.
• Temporary or permanent use.

For demanding industrial applications, request a sample or technical assessment before installing the product across a large floor.

Order DiamondGrip Interlock Tile 500 × 500 × 5mm in South Africa

Choose the DiamondGrip Interlock Tile 500 × 500 × 5mm when you need a durable modular PVC floor with a practical diamond-tread surface.

It is suitable for many garages, workshops, storage rooms, utility spaces and selected commercial interiors. The snap-together edge system supports straightforward installation, while the modular format allows individual sections to be replaced or extended later.

PVC Floor Tile offers factory-direct pricing, bulk-order assistance and delivery across South Africa. Provide your floor measurements, preferred colour and application details when requesting a quotation so that the correct quantity and product suitability can be assessed.

Frequently Asked Questions

What is the DiamondGrip Interlock Tile made from?

The tile is manufactured from flexible recycled PVC.

What size is each tile?

Each tile measures 500 × 500 × 5mm.

How many tiles cover one square metre?

Four 500 × 500mm tiles cover approximately one square metre.

A correctly installed loose-lay floor can generally be used once all connections and perimeter sections have been checked. Bonded installations must follow the adhesive curing instructions.