Tight-Lock Interlocking Rubber Tiles – Orange (1sqm = 4 tiles)

Add high-visibility performance to your space. These Tight-Lock Interlocking Rubber Tiles snap together for a seamless, non-slip floor you can install in minutes. Sold in 1sqm packs (4 tiles) for simple ordering and scaling.

Why choose Tight-Lock (Buyer intent)

• Stronger joints: The Tight-Lock multi-point edge resists creep and gapping under traffic.

• Safety colour: Orange boosts visibility for lanes, zones, and hazard areas.

• DIY fast: No glue for most installs—lay, lock, and use the same day.

• Cost-smart: Replace single tiles if damaged instead of redoing the floor.

Technical specs

• Material: Recycled rubber (SBR)

• Size: 500 × 500 mm (each tile ≈ 0.25 m²)

• Pack: 1 m² = 4 tiles

• Thickness: 6–10 mm variants

• Interlock: Tight-Lock multi-point puzzle edge

• Slip rating: R10 anti-slip

• Water: 100% water-resistant; easy to mop

• Use: Indoor / semi-outdoor (covered areas)

• Colour: Orange (high-visibility)

Key features of Tight-Lock Interlocking Rubber Tiles

• Tight-Lock stability for heavy footfall and trolley traffic.

• Non-slip texture for safer footing in dry and damp conditions.

• Modular & portable—lift, replace, or reconfigure anytime.

• Impact & noise damping for more comfortable, quieter floors.

 Benefits of Tight-Lock Interlocking Rubber Tiles

• Protects subfloors from scuffs, chips, and tyre marks.

• Clear visual zoning with orange to mark walkways/areas.

• Lower maintenance—quick sweep and mop keeps floors fresh.

• Scales with you—add more 1sqm packs as your space grows.

 Recommended applications

• Warehouses & workshops: walkways, pack lines, work cells.

• Garages & service bays: resists common fluids and abrasion.

• Gyms & studios: lifting zones, sled lanes, functional areas.

• Retail back-of-house & events: rapid install, clean removal.

 Installation

• Prep: Sweep/vacuum; ensure a flat, dry surface.

• Plan: Start from a straight wall/line; dry-fit around obstacles.

• Lock: Engage Tight-Lock edges; tap home with a rubber mallet.

• Finish: Trim perimeter with a straightedge; add ramps/corners if needed.

Care & maintenance

• Routine clean: Sweep or vacuum grit; damp-mop with neutral detergent.

• Spills: Wipe oils/chemicals promptly to preserve finish.

• Point loads: Use pads under jacks/stands to spread load.

• Checks: Re-seat lifted seams; replace tiles that are heavily worn.

8) FAQs

•  How many tiles do I need?
   4 tiles = 1 m². Measure your area in m² and add 5–10% for trimming.
• Can vehicles drive over them?
  Yes, on a sound, level subfloor. For forklifts, consider thicker variants.
•  Are they suitable outdoors?
   Use indoors/semi-outdoors (covered). Ask about dedicated outdoor options for full sun/rain exposure.